De webwinkel is momenteel even niet bereikbaar.
Voor vragen kun je ons e-mailen


1.      What is an ice o lator?
Iceolator is the final product that remains after the process in which the iceolator machine  is used. Iceolator is a high quality product that contains the hash coming from the extraction process with a high THC content.

2.      Which plug comes with the iceolator machine at delivery?
The iceolator machine comes with the standard European plug in the Netherlands, but it is also possible to order with a U.S. and U.K. plug.

3.      How can you cut and process the waste with the iceolator machine?
With the new innovation in the iceolator area it is possible to process 800 grams and it can be done at once.

4.      How much ice o lator do I get after cutting about 800 grams of waste?
That depends on the cutting waste is being used. A strong weed species will provide a better iceolator and it will also come from more than one species with little THC. Also, it is possible to make it even from a lower quality weed harvest. When the material is well chosen, an entire tasty iceolator can assume in average of 5 %.

5.      What is an iceolator machine?
The iceolator machine is suitable for making within a short time and with little effort a high quality hash product. The Iceomaker is an innovation in this area.

6.      What are the bubble bags?
Bubble bags are required to filter the iceolator from water. After the process with the iceolator machine, the water with small and large crystals is molded into various large bubble bags.

7.      What do I need for the process to make iceolator?
(everything comes as standard in the complete set)
  • the temperature: it is essential that water must be below 4 degrees
  • the iceomaker consumes electricity and water
  • bubble bags
  • the sieve: pressure must be applied through for the wet iceolator to well dry
  • the zipper bag: the bag that goes into the Iceomaker machine
  • 2-3 Kilos of ice must be put in the Iceomaker.
8.      How can I process and cut 800 grams of cutting waste?
That depends on the type of cutting of the waste. The better the quality of the weed, the better the quality of the cutting waste and better the quality of the ice o lator. So the more THC the cutting waste has, the more spins you can do thereof. The quality will be slightly more because very small blades come along. Also, there will be less of them coming after every turn but you can decide what is worth to you and not bother yourself too much. If you want a good material, we recommend to turn at least 4 times.

9.      Can I cut the all plant in the Iceomaker?
No, the branches should be removed before putting the cutting waste in the machines. They must be placed in the rubbish bag. The twigs should not damage the bag, so it is advisable that all branches must not bend out of it. By figuring out to do so, the material is much better and there is less work to do for the iceolator, because there is less material to be removed.

10.     How big should the ice blocks that go into the machine be?
It is advisable to not use too big ice blocks, because this can influence the life of the machine. Use the ice machine from our range.

11.     How much ice should I put in the machine?
It is advisable to use at least 2.3 pounds of ice cubes. If you use larger blocks, make them smaller, you can damage the machine. The amount of ice that you should throw in it also depends on the ambient temperature and the temperature of the water. You can reuse the water and the extraction bags that passed through the machine. Keep in mind that the water is going to be smelly. If there are residues remaining in the extraction bags, it is better to remove it before using the bags again.

12.     In what position the machine must stand for an optimal functioning?
In position 1. The, turn it clockwise. Use position 2 for the machine to wear out faster.

13.     How old should the plant material be for the Ice o maker?
The fresher the better! But try not to leave the material more than 2 days outside. Once it is in the freezer, you can keep it as long as you want before you start working with it.